NISSAN COMB. OF NIS DK1 / NIS KG2 3L0 | OEMatch Automotive Spraycan

NISSAN – OEMatch Automotive Spray Paint in COMB. OF NIS DK1 / NIS KG2 (3L0)

This OEMatching Automotive Basecoat Spray Can is precisely matched to NISSAN COMB. OF NIS DK1 / NIS KG2 (3L0), engineered to deliver factory-accurate color performance for both professional painters and DIY users. With our proprietary adjustable nozzle on the spray can, you are able to achieve professional spray gun level finishes without the need for the professional spray set up.

This paint color is designed as a 2 stage system, which means it doesn't require a specific undercoat. This makes this paint color beginner friendly and much easier to spray and match vs a tri-stage. All of our OEMatch Basecoats require a Gray Sealer as the ground coat and then needs to be topped with one of our 2k Clearcoat for the gloss and protection. This Alpha Automotive Basecoat offers smooth application, consistent coverage, and a true OEM finish. Perfect for spot repairs, panel resprays, or full restorations.

Color details:

• Make: NISSAN
• Color Name: COMB. OF NIS DK1 / NIS KG2
• Color Code: 3L0
• Stage System: 2-Stage

How to build a paint kit:

• On the website we have a paint kit builder that allows you to choose what you are painting and we create a complete cart to make sure you get all of the paint components needed for your project!
• Build Your Own Paint kit and choose just the items and quantities you need for your project.
• All OEMatch Spray Paints require our 1k Epoxy Primer as a ground coat and our 2k Clearcoat Spray Can as the topcoat! Please make sure you at least get those for your project

2-stage paint application:

1. Decide the panels that need to be painted / blended into. With OEM paint, you want to blend into surrounding panels to guarantee a good match and final result.
2. Clean all panels you plan to paint with wax & grease remover or isopropyl alcohol
3. Complete any bodywork and high build priming as needed
4. Sand the panels with 600 grit or a gray scuff pad to make sure there is no shiny areas
5. Reclean the panels with wax & grease remover or isopropyl alcohol
6. If complete panel replacement: Seal the replacement panel completely and blend into the surrounding panels as needed with our 1k Epoxy Primer
   
   If spot repair on an OEM painted panel: Spot seal the repair area with our 1k Epoxy Primer, blending into the panel to have a slow transition of sealer into the sanded factory paint
   
   *Allow the sealer to air dry for 1hour (after dry to touch) before moving on.
7. Spray 2-4 coats of OEMatch Basecoat , blending into the surrounding panels or the OEM sanded finish if doing a spot repair. You are looking for full coverage and effect. You are ready to spray the next basecoat layer when the finish is “matte” and dry to the touch. PRO TIP: You can check masking with a gloved finger to confirm its dry
8. Once you have full paint coverage and are happy with your blends, wait 1 hour and move on to the next step: Clearcoat!
9. Follow the activation instructions on the Alpha 2k Clearcoat Spray Can and then spray 2-3 medium wet coats on the complete panels with the adjustable nozzle at full width. This will encapsulate the blended paint and give the entire panel fresh clearcoat that has deep gloss and protection.
   
   Pro Tip: Recoat clearcoat when the previous coat is “fingerprinty” - you can check this by touching surrounding masking. Usually about 10 mins
10. Let dry for at least 8 hours - then unmask / assemble!

What is blending?

Blending (also called "feathering out" or "melting in") means you gradually taper your new basecoat outward so that the metallic orientation, pearl load, and color tone flow naturally into the existing OEM finish. Instead of stopping the color at a hard tape line, you create a smooth visual transition. The clearcoat then covers the entire panel (or the blend area + full panel), locking everything in and making the repair seamless.